window.dataLayer = window.dataLayer || []; function gtag() { dataLayer.push(arguments); } gtag('js', new Date()); gtag('config', 'G-3PVPMEJRMX'); Mechanical Engineering Department Infrastructure | Integral University Lucknow

Departmental Laboratories

Material Science and Testing Lab

Materials Science Laboratory (MSL) is an interdisciplinary facility dedicated to study of current materials and those of future interest.

It has following setups Equipments:
  • Optical Microscope
  • Universal testing machine
  • Impact testing machine
  • Torsion testing machine
  • Hardness tester
  • Fatique testing machine
  • Spring testing machine
  • Heat Furnace
  • Polishing machine

Heat and Mass Transfer Lab

Heat and MassTransfer Laboratory caters to the needs of B.Tech. 3rd year Mechanical Engineering and B.Tech 2nd year Bio-Technology students. Experiments in this lab help the students to enhance their practical understanding of heat transfer modes . These experiments also pave way for inculcating certain innovative skills in the students making them to use the experimental setups as starting point to take up higher level experimental studies in Heat Transfer.

Following major experimental setup are available in this Lab
  • Natural convection apparatus
  • Forced convection apparatus
  • Pin fin apparatus
  • Heat pipe apparatus
  • Parallel flow and counter flow heat exchanger apparatus
  • Thermal conductivity of composite wall apparatus
  • Stefan’s Boltzmann apparatus
  • Critical heat flux apparatus
  • Anemometer

Basic Mechanical Engineering Lab

Basic mechanical engineering lab, common for all the branches of B.Tech. First year, is a well established lab to impart the fundamental understanding of mechanical components and systems . In this lab, the under graduate students learn the working of boilers , refrigerators and engines with the help of actual and prototype models.

This lab consist of following models and equipments
  • Universal testing machine
  • Impact testing machine
  • Hardness tester
  • Model of locomotive boiler
  • Model of Lancashire boiler
  • Model of Babcock and Wilcox boiler
  • Model of two-stroke petrol engine
  • Model of four-stroke petrol engine
  • Model of four-stroke diesel engine
  • Model of vapour compression refrigeration system
  • Model of steam engine

Refrigeration & Air-conditioning Lab

Refrigeration and Air Conditioning Lab is utilized to conduct undergraduate practicals to the B.Tech sixth semester students . The lab is well equipped with the experimental setups, models and charts as required in the curriculum. This Laboratory is used by students for practical lerning and for the enhancement of knowledge.

Laboratory is equipped with the following setups
  • Refrigeration Test-Rig.
  • Air-Conditioning Test-Rig
  • Window Air Conditioner.
  • Model of Automatic Expansion Valve
  • Model of Hand Operated Expansion Valve
  • Model of Thermostatic Expansion Valve.
  • Model of Solenoid Valve.
  • Model of Compressor.
  • Model of Condenser.
  • Model of Capillary Tube

Measurements, Metrology & Control Lab

Measurements, Metrology and Control Lab have all comprehensive experimental set-ups catering to the requirements of curriculum of the B. Tech. Fourth semester. The subject imparts necessary knowledge so that student can understand the salient concept and principles required to develop the ability of using different types of measuring and precision instruments.

The Lab has following major equipments
  • Profile Projector
  • Sine Bar
  • Slip Gauges
  • Dial Indicator
  • Surface Plate
  • Strain Gauge
  • Stroboscope
  • Feeler Gauges
  • Vernier Calipers
  • Combination Square
  • Engineers Square
  • Pressure Transducer
  • Temperature Sensors
  • Force Transducer
  • Stabilizer
  • Vernier Height Gauge
  • Vernier Depth Gauge
  • Micro Snap Gauge
  • Pneumatic Comparator
  • Plug Thread Gauge
  • Radius Gauge
  • Universal Surface Gauge
  • Thread Gauge
  • Straight Edge
  • Micro Meter
  • V Block
  • Magnetic Stand
  • Dial Bore Gauge
  • Dial Gauge

Automobile Engineering Lab

Modern automotive industries need experts in vehicle design and manufacture. With this in mind, the Automobile Engineering Lab is developed. This lab is in curriculum of B. Tech. Seventh semester.The objective of this lab is to give students a broad exposure in the design, development and testing of automobiles with emphasis on latest technologies.

The Lab has following major equipments
  • 4 Stroke 4 cylinder S.I. Engine with Hydraulic Dynamometer & Morse test arrangement
  • Techo-generator with speed indicator
  • Pump with fitting with tank for Dynamometer
  • Protector
  • Braking and Steering System of a Car
  • Solex Carburetor
  • MPFI system
  • Model of Braking and Steering System
  • Differential Gear Box
  • Fuel Pump Euro-2
  • 4 Stroke 4 cylinder C.I. Engine
  • Model of Synchromesh Gear Box

Manufacturing Science Lab

Manufacturing is the transformation of raw material into desired product. Manufacturing science lab is very important lab for the students of mechanical engineering students because in this lab we apply our scientific concepts for making of useful product which we use in our daily life. In this lab students learn about pattern making , casting, power press operation and drilling operations.

This lab has following equipments and machineries
  • Oil fired tilting furnace
  • Pit furnace
  • Moulding box
  • Wood working lathe
  • Vertical band saw
  • Drilling machines
  • Jigs
  • Power press
  • Hydraulic pipe bending machine
  • Leg shearing machine

Applied Thermodynamics Lab

The Laboratory of Applied Thermodynamics is designed to enhance B.Tech. Third semester students' understanding of thermal engineering principles . The lab focuses on areas related to thermodynamics including heat engines ,work transfer devices and heat transfer.

It has got following setups
  • Model of 2 stroke and four stroke engines.
  • Working model of 4 stroke engine to draw heat balance sheet
  • Model of High pressure Water tube boilers La-Mont and Loeffler boiler
  • Working Model of Steam engine
  • Model of Thermal power plant
  • Model of vapour absorption refrigeration system
  • Set up for study of valve timing diagram for 2 and 4 stroke engines.

Fluid Mechanics and Machinery Lab

Fluid mechanics and Fluid machinery laboratories have all comprehensive experimental set-ups catering to the requirements of curriculum. The fluid mechanics lab is for the students of B.Tech third semester and fluid machinery lab is for the B.Tech sixth semester

The laboratory is equipped with following experimental set-ups
  • Meta-Centric Height Apparatus
  • Heleshaw Apparatus
  • Bernoulli’s Apparatus
  • Venturimeter & Orifice Meter Apparatus
  • Notch Apparatus
  • Reynolds Apparatus
  • RotameterApparatus
  • Laminar & Turbulent Flow Apparatus
  • Friction Losses Apparatus
  • Free & Forced Vortex Apparatus
  • Impact of jet Apparatus
  • Pelton Turbine Test Rig
  • Francis Turbine Test Rig
  • Centrifugal Pump Test Rig
  • Reciprocating Pump Test Rig
  • Gear Oil Pump Test Rig
  • Hydraulic Ram Test Rig

Dynamics and Kinematics of Machines Lab

The Dynamics of Machines Lab has a large number of kinematics models as well as experimental equipments to impart practical learning of the subject to the students of B. Tech. Fifth semester students

The laboratory has following set-ups and models
  • Governor
  • Gyroscope
  • Whirling of shaft
  • Gear trains
  • Balancing (static and dynamic)
  • Vibration Apparatus
  • Cam Analysis Apparatus
  • Band and Block Brakes
  • Crank & Connecting Rod Mechanisms
  • Crank Shaft to Slider Mechanisms
  • Crank & Slotted Link Mechanisms
  • Conical Clutch
  • Disk Brake
  • Double Shoe Brake
  • Differential Gear
  • Epicyclic Gear Model
  • Hydraulics Brake
  • Internal Gear with PinionGear Box


The CAD/CAM laboratory is one of the key instructional labs in Mechanical Engineering department. CAD/CAM is defined the use of information technology (IT) in the Design and manufacturing process. It supports undergraduate students, post graduate students, research scholars for their design, manufacturing and analysis based projects and research works. In this laboratory the students learn the fundamentals of numerical control (NC) technology, programming of computer numerical control (CNC) machines in NC codes and APT language and with CAD/CAM systems.

The process of design, simulation and prototyping takes place in a digitally integrated environment.

The laboratory contains the same hardware and software used by industry professionals in the creation and maintenance of power systems giving students the opportunity to develop the skills and experience that will aid them in the work field.

  • 30 Nos. of advance core i5 computer systems with 2 GB RAM.
  • Software such as SolidWorks, AutoCAD and C/C++.
  • CNC turning machine


The Integral university has a modern and well established workshop. It is equipped with various traditional as well as most modern machines, latest tools and instruments. It comprises of different shops such as Machine shop, carpentry shop, smithy & forging shop, welding shop, sheet metal fabrication shop, fitting shop. The students get practical training and exposer to industrial machining, drilling, welding, woodworking, metal shaping by smithy, sheetmetal fabrication and fitting of components work.

The enginnering skill is developed by working and doing job by their own hands. The working models have been fabricated in such an innovative manner that teaching to them becomes easy and interesting. The students acquire skill to work on machinery with the help of these models.

The workshop is utilized not only for providing practical training to B.Tech. Students but also to develop and construct many other machines, equipments and working models of various complicated systemfor other departments and labs. e.g. Fume hood for Bio. Technology, motorized potter's wheel for Architecture department etc. The vehicles of university are being maintained and repaired in the workshop.